Online Michele Serein Diamond Gold MWW21A000011 Cheap watch

  •  

    fashion replica Zenith Captain watches

     

    Richard Mille RM 36-01 Tourbillon G Sensor Sebastian Loeb

    Unveiled at the 2014 SIHH, RM 36-01 Tourbillon G Sensor Sebastian Loeb Chronograph is equipped with a hand-held tourbillon movement with a rotating G-sensor, power reserve indicator and function selector Features. This watch will be made of carbon nanotubes and titanium, a limited edition of 30 pieces.

    Baseplate and bridge in grade 5 titanium: The baseplate has been completed in grade 5 titanium, a biocompatible, highly corrosion-resistant and very hard alloy that allows the gear train to work effortlessly. This alloy is 90% Grade 5 titanium, 6% aluminum and 4% vanadium. This combination further increases its mechanical properties, which explains its frequent use in the aviation, aerospace and automotive industries. The bottom plate is also PVD treated. Hollow floors and bridges have been rigorously and completely validated to optimize their resistance.sale replica Michele Serein watches

    Rotary G-Sensor: Composed of more than 50 parts measuring only 17mm, the Rotary G-Sensor is designed to visually show how much G a driver accumulates at different stages, such as rapid acceleration, deceleration and lateral force. The direction of G force to be recorded is set by rotating the bezel. The G sensor system operates on the principle of weight displacement. The hand on the scale indicates whether the amount of Gs accumulated by the driver is light (green area) or critical (red area). The push-piece in the center of the sapphire glass quickly resets it to zero.

    Function selector: Buttons in the center of the crown, in a similar way to a car transmission, allow winding, neutral and hand-held functions to be selected with a simple push. The small hand around 4:00 shows the selected function: W (winding) - N (center line) - H (hand setting).

    Free Balance Swing of Variable Inertia: The variable inertia Free Balance Spring and Terminal Curve Spring ensure greater reliability during impact and motion assembly and disassembly for better timing results.replica watches for sale

     

     

    Quick rotation of the bucket (6 hours per revolution instead of 7.5 hours): The advantages of this bucket are as follows:
    - Periodic winding significantly reduce the phenomenon of bonding, thereby enhancing performance
    - Provides excellent mainspring triangle curve with ideal power reserve / performance and regularity ratio

    Roller pawl gradually recoils: This device achieves a favorable winding gain (about 20%), especially at winding start. This also contributes to the internal tensioning of the mainspring.

    Modular time setting mechanism to prevent the back: longevity and maintenance provide the following advantages:

    - Because the parts are mounted on the outside of the movement, it is possible to change the time-setting components during possible defects or maintenance without affecting the integrity of the floor,
    - Installing and removing the module from behind does not require rubbing of hands and dial.


    Wheel-based time setting system (back of the movement): Provides smooth time setting by eliminating friction from meshing with alternative rolling friction.Replica HYT H1 CIGAR watch 148-NC-RO-GF-AB

    The ceramic base stone is a tourbillon cage: this reflects a technique of eliminating wear phenomena and a long-term view that leads to improved technical tribology.

    Rigid ARCAP Central Bridge: Ensures high rigidity of the foundation and the train axle assembly in use.

    Winding drum teeth with central involute profile and three-wheeled pinion: The central involute profile of bobbin teeth and pinion provides an optimum pressure angle of 20 °. This promotes efficient rotational movement and allows to compensate for possible changes in the engagement of the running train, thereby ensuring excellent torque transfer and with significant performance improvements.


    Grade 5 Spline Screw Titanium alloy for bridges: This provides better control of the torque applied to the screws during assembly. Therefore, these screws are not affected by physical operations during assembly or disassembly and are not subject to aging.best Richard Mille RM 67 replica watches

    movement
    CALIBER RM36-01: Manual winding tourbillon movement with hours, minutes, rotary G-sensor, power reserve indicator and function selector. Power reserve: about 70 hours (± 10%), 2 o'clock digital scale display
    - Sports Diameter: 36.60mm
    - Thickness: 3.96 mm
    - G sensor module thickness: 10.25 mm
    - Tourbillon diameter: 12.30 mm
    - Balance wheel diameter: 10 mm
    - Gems: 37
      - Balance: glucose, 2 arms and 4 setscrew, moment of inertia 11.50 mg cm, lifting angle 53 °
    - Frequency: 21'600 vph (3 Hz)
    - Balance spring: ELINVAR byNivarox®
    - Impact protection: KIF ELASTOR KE 160 B28
      - Handle mandrel: Nickel-free chronifer (DIN x 46 Cr 13 + S) with the following features: Stainless steel - Antimagnetic - Suitable for tempering.

    Case
    RM 36-01 consists of three parts, made of extremely advanced materials:
    Rotating bezel: made of TZP-Z brown ceramic, alumina powder tube injected at 2000 bar pressure. It is a special scratch-resistant material (1400 Vickers) with a stable color. Brown ceramic requires special diamond tools for long processing and grinding.
    Caseband: Made of very strong anthracite polymer infused with carbon nanotubes. This combination of materials produces perfect protection for sports and tourbillons.
    Table back and fixed bezel: Grade 5 titanium with biocompatible, highly corrosion resistant and very hard alloy. It consists of 90% titanium, 6% aluminum and 4% vanadium to further improve the mechanical properties of the material.
    The design and execution of the watch shows a complete conceptual approach to the movement, case and dial. So everything was built to very strict specifications, just like the analytical engineering methods used in Formula One car design, the chassis and engine were fully harmoniously developed.

    A three-part enclosure is water-resistant to 30 meters and is guaranteed by two Nitril O-rings. Shell by the 5 titanium 20 spline screws and 316L stainless steel wear washers assembled. Diameter: 47.70 x 17.37 mm.

    Grade 5 titanium spline screws
    This allows better control of the torque applied to the screw during assembly. Therefore, these screws are not affected by physical operations during assembly or disassembly and are not subject to aging.

    Flange
    In titanium, a black electroplated coating, indicating dots filled with approved luminescent materials.

    dial
    Sapphire (thickness: 0.40 mm) anti-glare treatment (both sides).

    crystal
    Bezel Side: Sapphire (1800 Vickers) Anti-Glare Treatment (Both Sides)
    Thickness: Center 2.45 mm, the outer edge of 1.72 mm
    Back cover: sapphire anti-glare treatment (both sides)
    Thickness: Center 1.00 mm, outer edge 1.74 mm

    finishing
    Movement
    - Hand sanded and polished
    - Lock part of the hand polished
    - sapphire sandblasted section
    - Lap and polishing contact points
    - polishing pivot

    Steel parts
    - sapphire blasting surface
    - Hand-polished and hand-polished
    - Draw the outer surface

    wheel
    - Concave chamfer with diamond tool - smooth
    Polished surface
      - rhodium plating (before cutting teeth)
    - Minimize the wheel to maintain its profile and overall performance

     

    buy replica AUDEMARS PIGUET watches